Skip to main content

  Morrow Mechanical is now Amazing Morrow!

We're Hiring! Apply Online To Join the Ammmazing Morrow Team!

Hurricane Safety Tips for Your Private Well

In the wake of the horrific flooding during Hurricane Harvey, homeowners across Texas have been stepping up their game in hurricane preparedness. However, among the emergency safety kits, food, and backup generators you’ve procured, you may have overlooked your private well. To help you cover all your bases, Morrow Mechanical is here to share some hurricane safety tips for your private well.

Knowing the Potential Risks

When flooding occurs during hurricanes, homeowners with well systems are particularly vulnerable to contamination of their water. To break down the risks, here are some flooding hazards to consider:

1.   Toxic Runoff

As floodwater moves through the landscape, it picks up all sorts of bacteria from sewage, industrial, and agricultural waste. Then, if your well becomes flooded by this toxic runoff, your water supply can quickly become contaminated.

2.   Algal Blooms

If you have a private well, you are at an even higher risk when rivers flood and develop algal blooms. Causing abdominal pain, vomiting, diarrhea, liver or kidney damage, and neurotoxicity, algal blooms are no joke, if ingested. 

3.   Debris Damage

With the high winds and flooding that carry large debris during hurricanes, your well casing can easily become cracked or distorted. As a result, the surrounding floodwater full of harmful pollutants can infiltrate your water supply.

How to Prepare Your Well Beforehand

In order to prevent your well from flooding before a hurricane hits, you’ll want to eliminate any openings through which floodwater can infiltrate the well. For the most thorough defense, be sure to take the following steps:

1.   Disconnect the power supply to your well.

Before the hurricane hits, plan ahead by disconnecting the power supply to your well. This means turning your pump off at the circuit breaker and leaving it off throughout the storm. By keeping your power off, you can avoid a surge through the electrical lines that might damage the electrical components to your system. Also, be sure to have a surge suppressor on your pump as an added measure of protection.

2.   Replace the well vent or extend the casing.

Secondly, you should replace the well vent with a water-tight plug to ensure no water can infiltrate the tank. Another alternative can be permanently extending the casing so that it is above flood level. Either way, you will want to make sure your well is impervious to floodwater.

3.   Cover the top of the well.

Once you’ve taken care of the well vent, you should cover the top of the well with durable plastic. To keep it in place during the storm, secure the plastic with waterproof tape. Not only will this help keep debris and runoff out of your well, but it will make clean-up after the storm much easier.

4.   Surround your well with sandbags or water-inflated flood barriers.

Finally, in order to keep floodwater from infiltrating your well, surround the exterior of your well with sandbags or water-inflated flood barriers. This will keep floodwater and debris and runoff from entering your tank or damaging the exterior casing. 

Signs that Your Well is Contaminated

Although we recommend having your water professionally tested after major flooding, there are some signs to look for on your own. For instance, if your well is cracked or damaged after the hurricane, it’s safe to assume that your water has been compromised. Also, look for signs of flooding. Even if there is not floodwater surrounding the well, debris and mud stains on the well could indicate that there was flooding during the storm.

How to Ensure Safe Water After the Storm

Once you’ve confirmed that your well water is contaminated, you’ll need to flush the entire well, clean and turn on the pump, and disinfect it. For the most effective disinfection method, we recommend using shock chlorination. With this process, you will flush your system, and then pour a strong chlorine solution in the well and distribution system. Once you’ve completed this process, you’ll need to submit a new sample for testing at a professional laboratory to ensure your water is safe again.

Have a Backup Plan in Place

Although there are plenty of measures you can take to protect your private well from flooding before a hurricane, it’s always wise to have a backup plan. Therefore, we recommend preemptively filling your tubs and sinks with water to use when the power cuts off. Furthermore, you should have an emergency supply of bottled water that can be used for drinking and cooking during the storm.

Prepare with Morrow Mechanical

With the help of the pros at Morrow Mechanical, you can discover the best solutions to protect your home. To protect your home like a pro, call the team at Morrow Mechanical today!

Engaging Electrical Safety Month Activities to Enjoy with Your Kids

A little-known holiday that takes place in May is National Electrical Safety month. Considering how heavily the world relies on electricity for day-to-day life, this is an increasingly important holiday to observe. Are you wondering how you can celebrate this year? Well, the team at Morrow Mechanical is here to tell you about some fun activities you can do with your kids for National Electrical Safety Month!

1.   Visit Some Museums

Not only is it National Electrical Safety Month, but May is also National Museum Month! With that in mind, what better way to spend some time with your kids this month than visiting some interactive museums where they can put their electrical safety knowledge to the test? Therefore, we have a list of kids’ museums to celebrate both occasions:

·         Perot Museum

Featuring two different campuses in Victory Park and Fair Park, the Perot Museum offers 11 permanent exhibit halls, 14 temporary exhibit halls, and 6 different learning labs. Although it is located in Dallas, this museum is worth the trip if you have a science-loving kiddo. You can learn more about the Perot Museum by visiting the official site.

·         Children’s Museum of Houston

Located in the Museum District of Houston, this is one of the top children’s museum in the country! Designed and curated with all different children and families in mind, the Children’s Museum of Houston offers hands-on experiences that you can customize to suit your own learning interests. If this sounds like the perfect way to celebrate electrical safety month with your kiddos, you can learn more by visiting the official site.

·         Science Mill

Offering interactive learning programs, games, and technology-based exhibits, the Science Mill is a fun way to spend some quality time with your kids in an educational and interactive environment. Learn more by visiting the official site.

2.   Take a Trip to Little Beakers Science Lab for Kids

If you are looking for fun activities for your family, or for your kids and their friends, you can visit Little Beakers Science Lab for Kids. Not only does this lab offer an open lab, classes, group events, and guided labs, but you can even plan a fun birthday bash or enroll your kids in Little Beakers camp! You can learn more about this lab by visiting their site.

3.   Visit ESFI’s Interactive Kid’s Corner

Founded by the Electrical Safety Foundation International (ESFI) organization, their interactive kid’s corner offers several different electrical safety programs. Included in these programs are materials for hands-on activities, videos, and online games to make electrical safety training fun. If you want to learn more about this resource, visit their site. 

4.   Create a Simple Circuit Together

Although it may not seem like it in our high-tech world, it is valuable for kids to know that many electronics are battery-powered. With that in mind, you can teach them how batteries power electronics by creating a simple circuit with them. In order to do this, you will need a bulb holder, low voltage bulb, 1 AA battery, 2 wires, insulation tape, and a screwdriver. Once you’ve acquired these materials, here are the steps to create a simple circuit with your kids:

  • Attach each wire to one end of the bulb holder around the metal screws.
  • Then, tape the other end of the wires to the two battery ends.
  • Finally, watch your kids’ amazement when the bulb lights up!

5.   Play Some Online Electrical Safety Training Games

·         E-Smart Kids

One of the most fun interactive online games for kids to learn about electrical safety is the E-Smart game of Find the Hidden Dangers. Your kids can observe the different illustrated scenarios and identify the hidden electrical hazards in each picture. Easy to use and full of fun, this game can be accessed by visiting this site.

·         Convergence Training Electrical Safety Word Game

Similar to Wheel of Fortune, this game will teach and quiz your kids about electrical safety vocabulary and rules. If you are interested in learning more about this resource, you can visit this site.

6.   Create an Electrical Safety Poster

Last but not least is the classic fun of getting crafty and making an electrical safety poster with your kids. If you are looking for inspiration, there are plenty of creative ideas and resources to be explored online. Once your kids have finished their masterpiece, you can find a special place in your house to hang the poster!

Keep Your Home and Family Safe

For year-round safety, allow the pros at Morrow Mechanical to help you keep your  family happy with the best in HVAC service. Call us today or visit our website!

Schedule Service

"*" indicates required fields

This field is for validation purposes and should be left unchanged.